Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Chapin, SC (29036) · Local Professionals

Columbia Metal Roofing · Fast response in Chapin and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Chapin sits right on the edge of Lake Murray, where the water views come with wind-driven rain and summer storms that test every roof. The mix here is unmistakable: 1990s and 2000s brick and vinyl two-stories in subdivisions off Chapin Road, older lake cottages and full-time homes tucked into coves along the 29036 shoreline, and farmhouses and equipment sheds out toward the rural stretches of Lexington County.

Homeowners in Chapin call Columbia Metal Roofing because we know what lake weather does to a roof. Standing seam and stone-coated steel are what most folks around here ask about, and we install both with crews who are fully insured and used to working on tight lakefront lots where access is half the battle.

Metal Roofing in Chapin (29036)

Chapin is not one kind of neighborhood. Along the Lake Murray shoreline, lots are narrow and steep, with decks, docks, and retaining walls that leave little room for staging materials. Roofs there take wind-driven rain from summer thunderstorms and the occasional hurricane remnant, and the pines and oaks that frame the water drop limbs and needles that clog valleys and gutters. Inland, the subdivisions off Chapin Road and near Crooked Creek have larger lots but strict HOA design guidelines, so panel profile and color need to be settled before a single screw goes in. Out toward the farm country, barns and sheds need tough, low-maintenance panels that can handle hail and sun without constant attention.

Our team has worked across Lexington County and the Midlands long enough to know the difference between a lakefront retrofit and a straightforward re-roof on a brick ranch. We handle standing seam, corrugated and ribbed panels, stone-coated steel, and metal shingle systems, and we match the approach to the property instead of forcing one product on every job.

Our services in Chapin

How a Job Works in Chapin

Step 1: You call (803) 353-5064 or request a free estimate online. We schedule an on-site assessment at your Chapin property, look at the existing roof, attic, flashing, and drainage, and talk through what you want. You get a written scope and a clear price before anything is ordered.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any HOA design review. On lakefront lots we plan delivery and staging around narrow drives and seawalls, and we protect landscaping and docks as we work. Our crews are fully insured, and we keep the job site organized from tear-off through final panel installation.

Step 3: We clean up completely, haul away old materials, and walk the finished roof with you. You get a final inspection, maintenance notes, and a direct line to our team if anything comes up after we leave. We do not consider a Chapin job done until you have seen the details yourself.

Pricing in Chapin depends on the roof, not just the square footage. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Corrugated and ribbed panel roofing starts around $5.50, stone-coated steel and metal shingle systems start around $9, and copper or specialty metal starts around $20. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, flashing and chimney or skylight repair around $600, and gutters for metal roofs around $9 per linear foot. Lakefront access, roof pitch, the number of existing shingle layers, and how quickly you need us all affect the final number. Call (803) 353-5064 for a free, no-pressure estimate on your Chapin property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Chapin and nearby areas.

Do lakefront homes on Lake Murray need a different metal roof than inland Chapin homes?
Often, yes. Wind-driven rain off the water can push moisture into seams and flashing that would stay dry a few miles inland, so we pay close attention to panel gauge, fastener placement, and sealant details on lakefront roofs. Standing seam is popular for that reason, and stone-coated steel is a good option where a homeowner wants a more traditional look with strong wind resistance.
How fast can you respond to storm damage or an active leak in Chapin?
We prioritize active leaks and storm damage in the Chapin area. Call (803) 353-5064 and describe what you are seeing. We can often get out for an inspection quickly, and if a temporary fix is needed to stop water intrusion before a permanent repair, we will tell you what is possible and what it will cost.
What does a typical metal roof cost in Chapin, and what changes the price most?
Most Chapin homeowners are looking at roughly $8 to $10 per square foot for installation or standing seam, with repairs starting around $450. The biggest cost factors are roof size and pitch, whether we are tearing off old shingles or retrofitting over them, lakefront access and staging, and the panel system you choose. We give you a written estimate after seeing the property.
Do I need a permit for a metal roof in Chapin, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in this area, and the rules vary by jurisdiction. We handle the permit application and inspections as part of the job, and we recommend confirming current requirements with the local building department or checking the City of Chapin website before work begins.
What if my Chapin HOA has design rules or a neighbor disputes the property line during roofing?
HOA design review is common in Chapin subdivisions, so we ask for any architectural guidelines before ordering panels and help you submit the profile and color for approval. If a property line or setback question comes up, we keep our work within the permitted footprint and document the roof layout so there is no confusion with neighbors.
Are you insured for roofing work at my Chapin property?
Yes. Columbia Metal Roofing is fully insured, with general liability coverage and workers' compensation for our crews. We are happy to provide proof of insurance before work starts so you have it for your records.
What maintenance does a metal roof need in Chapin's climate?
In Chapin, the main jobs are keeping gutters and valleys clear of pine needles and oak leaves, checking fasteners and sealant after severe storms, and looking at flashing around chimneys and skylights. An annual inspection in late spring, before the summer storm season, catches most small issues before they become leaks. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm