In Columbia, metal roofing prices typically range from $5.50 to $20 per square foot for installation, while repairs often start around $450, depending on the material, roof complexity, and scope of work. Factors like roof pitch, accessibility, and whether you choose standing seam or corrugated panels can significantly affect the final cost, but a professional estimate will give you a clear picture.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Columbia and the Midlands. Panel systems built for brutal summer heat, severe storms and hurricane remnants, installed over premium synthetic underlayment with proper ventilation and wind-rated edges for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems. The premium choice for Columbia homes. Panels roll-formed to length and mechanically seamed, with no exposed screws, top wind ratings and a reflective finish that cuts the Midlands' famous summer heat. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of storm-worn shingle or end-of-life metal roofs. Old roofing hauled away, decking inspected and repaired, then a complete new metal system installed that stands up to heat, storms and algae. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles. No tear-off, less waste, lower cost, popular on Columbia brick ranches. We check deck condition and wind requirements first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing. Replacing panels dented by falling pine and oak limbs. Resealing seams and penetrations, and fixing failed flashing before the next thunderstorm finds its way inside. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs. Leaks traced to their true source (failed fasteners. Seam separation, flashing gaps, pipe boots and skylights) and fixed right, not just caulked over. Emergency tarping available after storms and hurricane remnants. |
| Screw Replacement & Re-Fastening | From $750 | Midlands heat and humidity crack washers and loosen screws on older exposed-fastener roofs across the region. The top cause of slow leaks on farmhouses, barns and lake cabins. Oversized screws and new washers fix it for a fraction of the cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V). The classic Carolina farmhouse roof and the workhorse for barns. Shops, carports and lake cabins across the Midlands. Quality panels installed with proper screw patterns and closures. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel. A favorite for Columbia homeowners who want wind-rated metal with a traditional look on bungalows and colonials. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish. Strong wind and hail performance, Class A fire rating and slate or shake profiles that suit Columbia's Tudors and brick colonials. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and terne-coated roofing for bay windows, porches, dormers and full architectural roofs. Premium metals that suit the historic homes of Shandon, Elmwood Park and Cottontown. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or rusted metal roofs. Surface prep. Rust treatment and high-performance reflective coating systems that cut summer heat gain and extend roof life 10-15 years on homes, barns and shops. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys and wall transitions. The number one leak point on Columbia roofs in summer downpours. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards are rarely needed in Columbia, but low-profile guards still help on steep metal roofs. They hold back ice storms like February 2014 and keep heavy wet debris from sliding off at once above entries. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of thunderstorm, hail, hurricane-remnant and fallen-tree damage to metal roofing. Thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements. Fastener condition, seam integrity, flashing, coating and heat wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing. Hangers that work with panel profiles, oversized downspouts for summer cloudbursts and guards that keep pine needles and oak leaves from clogging them. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, equipment sheds, churches, warehouses and light commercial buildings. Across Columbia and the Midlands, from peach orchards and farms to shops in town, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, and complex designs with multiple slopes, valleys, or penetrations increase installation time and cost.
- Material type and gauge : Standing seam, copper, and stone-coated steel cost more than corrugated panels due to material expenses and specialized installation techniques.
- Accessibility and roof height : Difficult-to-reach areas, steep pitches, or multi-story homes may require additional safety measures and equipment, raising labor costs.
- Condition of existing roof : If removal of old roofing or structural repairs are needed, this adds to the overall price. Retrofit over shingles can save on disposal fees.
What's included
- Travel included across the Columbia area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions, material preference, and any known issues ready before calling Columbia Metal Roofing at (803) 353-5064. Their free estimates include a thorough inspection and a detailed breakdown of labor, materials, and timeline, so you can budget with confidence.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated vs. copper), roof complexity, labor rates, and additional services like old roof removal or structural repairs. For example, corrugated panel roofing starts at $5.50 per sq ft, while copper roofing starts at $20 per sq ft.
Do you offer free estimates?
Yes, Columbia Metal Roofing provides free estimates for metal roof installation, replacement, and most repair services. Call (803) 353-5064 to schedule your appointment.
What payment methods do you accept?
Columbia Metal Roofing accepts cash, checks, and major credit cards. Financing options may be available for larger projects; ask for details when you call (803) 353-5064.