Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Swansea, SC (29160) · Local Professionals

Columbia Metal Roofing · Fast response in Swansea and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Swansea, South Carolina, is a small town where the lots are wide, the pines are tall, and a lot of homes still sit on acreage that has been in the family for generations. Drive down Highway 6 or 321 and you will see a mix of brick ranches, farmhouses, and the occasional new build going up on a cleared patch of land. Metal roofs have always made sense out here, and more homeowners in 29160 are choosing them for the heat and the storm resistance.

When a roof starts leaking or a storm peels back a panel, folks in Swansea call Columbia Metal Roofing because we know the difference between a city lot and a rural property with a barn, a shed, and a long gravel drive. We are based in Columbia, serve Swansea and the surrounding Midlands, and we treat every roof like it has to hold up to the same thing: hot summers, heavy thunderstorms, and the occasional ice storm.

Metal Roofing in Swansea (29160)

Swansea sits in Lexington County, and the properties here are different from what you find in a tight Columbia neighborhood. Many homes have long rooflines, detached shops, equipment sheds, and barns that all need metal. The ground can be sandy or clay-heavy depending on where you are, and drainage matters when summer storms drop a lot of rain in a short time. Access is usually easy on these larger lots, but we still plan for where the dumpster goes and how we get panels to the ridge without tearing up a lawn. Farm and orchard properties around Swansea often have corrugated or ribbed panel roofs that need screw replacement and re-fastening more than a full replacement, and we handle that work with insured crews.

Our team has worked across the Midlands, from lake homes on Lake Murray to farmhouses out toward Swansea. We know how to match a panel profile to an older home, how to flash a chimney on a metal roof, and how to keep a barn roof watertight without overbuilding it. If you are in Swansea and need a metal roof installed, repaired, or replaced, we can give you a straight answer after a free on-site look.

Our services in Swansea

How a Job Works in Swansea

Step 1: You call us at (803) 353-5064 or request a free estimate online. We schedule a time to come out to your Swansea property, walk the roof, check the fasteners, seams, and flashing, and talk through what you are seeing. You get a written estimate with the scope and the price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the crew. On rural properties, we plan panel delivery and staging so we do not block your drive or damage the yard. If your home is in an HOA or a historic district, we help you get the color and profile approved before we order materials. The work itself includes tear-off or retrofit, installation, and daily cleanup.

Step 3: When the job is done, we walk the property with you, check the roof, gutters, and ground for nails or debris, and make sure you are satisfied. We leave your place clean and give you a final invoice that matches the estimate.

Pricing in Swansea depends on the size and pitch of the roof, the condition of the existing roof, access, and how soon you need it done. For a typical metal roof installation, our prices start at $8 per square foot, standing seam starts at $10 per square foot, and a full replacement starts at $9 per square foot. If you want to go over existing shingles, a retrofit starts at $7 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. We give free estimates, so call (803) 353-5064 and we will give you a real number for your Swansea roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Swansea and nearby areas.

My barn and equipment shed near Swansea have corrugated panels with screws backing out. Can you re-fasten them without replacing the whole roof?
Yes. Screw replacement and re-fastening is common on farm and orchard buildings around Swansea. We replace the failed fasteners with the correct screws and washers, check the panels for cracks or wallowed-out holes, and seal as needed. If the panels are too far gone, we will tell you honestly and give you a price for new corrugated or ribbed panel roofing.
A storm just peeled back panels on my roof in Swansea. How fast can you get out here?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (803) 353-5064 and we will schedule the soonest available visit. We document the damage for your insurance claim and can often make temporary repairs to stop water intrusion before the permanent fix.
What does a metal roof cost for a typical three-bedroom ranch in Swansea?
Most ranch homes in Swansea fall into a range based on square footage and roof complexity. As a ballpark, metal roof installation starts at $8 per square foot, and a retrofit over existing shingles starts at $7 per square foot. A repair or leak fix starts at $450. The only way to know for sure is a free on-site estimate, so call (803) 353-5064.
Do I need a permit to replace my roof in Swansea, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Lexington County, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection. You can also check with the City of Swansea through the official county site at https://www.lex-co.sc.gov for local requirements before you start.
My neighbor says my new metal roof might cross the property line. How do you handle that in Swansea?
We build to the property lines shown on your survey and keep the work on your side. If there is any question, we ask you to have your survey available before we start. For HOA communities, we help you submit the panel profile and color for approval so there are no surprises after installation.
Are you insured for work on my Swansea property?
Yes. Columbia Metal Roofing is fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before work begins so you have it for your records.
What should I do to maintain a metal roof in Swansea between storms?
Check the fasteners and seams once a year, especially after summer thunderstorms or an ice event. Keep gutters clear of pine needles and leaves, and look for any lifted panels or flashing gaps. We offer free inspections and can replace screws or re-seal before a small issue becomes a leak. Call (803) 353-5064 to schedule a check.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm