Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Columbia, SC (29201) · Local Professionals

Columbia Metal Roofing · Fast response in Columbia and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Columbia's historic Shandon bungalows and the brick ranches out toward Forest Acres sit under some of the tallest loblolly pines in the Midlands, and that combination of summer heat, heavy thunderstorms, and falling limbs is hard on any roof. From the 1900s Craftsman homes near Elmwood Park to the lake houses on Lake Murray, homeowners here need a roof that reflects heat and stands up to whatever blows through.

We're Columbia Metal Roofing, based right here in 29201, and we've worked on everything from mill-village cottages in Olympia to newer two-story homes in Blythewood. When a storm drops a pine limb through your panels or your fasteners start backing out after a decade of thermal cycling, call us at (803) 353-5064. We're a Metal Roofing Alliance member and fully insured, and we know how roofs perform in this climate.

Metal Roofing in Columbia (29201)

The Midlands sit on the Fall Line where the Piedmont meets the Sandhills, and that means clay soils, sandy patches, and drainage that can shift after a hard rain. In older neighborhoods like Wales Garden and Rosewood, lots are tight and mature trees overhang the roofline, so we plan access carefully and often stage materials in the driveway rather than the yard. Historic districts and HOAs may restrict panel profiles and colors, and homes near the rivers, like those in Melrose Heights, can deal with extra humidity and organic debris buildup in valleys and gutters. We also see a lot of post-war brick ranches across St. Andrews and Dentsville where a metal roof over existing shingles makes sense if the deck is sound and the code allows it.

Our team has installed standing seam, corrugated panels, stone-coated steel, and copper across Columbia and the surrounding areas. We know which fasteners and sealants hold up to the summer heat and the occasional ice storm, and we pay attention to flashing details around chimneys and skylights, which is where most leaks start.

Our services in Columbia

How a Job Works in Columbia

Step 1: You call (803) 353-5064 or request a free estimate online. We schedule an on-site assessment, inspect the roof and attic, check flashings and fasteners, and talk through options and budget. If it's an insurance claim, we document the damage with photos and measurements, but coverage decisions are always up to your insurer.

Step 2: Once you approve the scope, we pull the required roofing permit through the local building department (rules vary by jurisdiction, so we verify before we start) and schedule the work. On tight Shandon lots or steep lake-home roofs, we use careful staging and fall protection. For HOA or historic properties, we coordinate color and profile approvals before ordering materials.

Step 3: When the job is done, we magnet-sweep the yard for nails, haul away old materials, and walk the roof and gutters with you. We leave your property clean and show you what we did and what to watch for.

Pricing in Columbia depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and retrofitting over existing shingles around $7. Corrugated and ribbed panel roofing starts near $5.50 per square foot, while copper and specialty metals start around $20. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot. Storm damage inspections are free. Call (803) 353-5064 for a written estimate tailored to your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Columbia and nearby areas.

My Shandon bungalow has huge oaks over the roof and I keep getting debris in the valleys. What's the best metal roof setup for that?
For heavy tree cover, we often recommend a standing seam profile with fewer exposed fasteners and a smooth surface that sheds leaves and pine straw more easily. We also size gutters and downspouts generously and may suggest gutter guards. The key is keeping debris from sitting in valleys and against flashings, which is where moisture gets trapped.
A storm just blew through Forest Acres and lifted some panels on my roof. How fast can you get out?
We prioritize active leaks and storm damage. Call (803) 353-5064 and we'll schedule an inspection, often same or next day depending on volume. We can tarp or secure the area to prevent further water intrusion and then provide a repair or replacement estimate.
What does a typical metal roof replacement cost for a brick ranch in St. Andrews?
Most ranch homes in that area fall in the $9 to $12 per square foot range for replacement, depending on roof complexity, pitch, and whether we need to replace decking. A simple gable roof with good access is on the lower end. We give a firm written estimate after inspecting the roof and attic.
Do I need a permit to replace my roof in Columbia, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and fees vary by jurisdiction. We verify the requirements with the local building department before starting and can pull the permit for you. You can also check general information at the City of Columbia website (https://www.columbiasc.gov) or call the building department directly.
My HOA requires a specific roof color and profile. Can you help with approval?
Yes. We can provide product samples, manufacturer spec sheets, and color charts for your HOA or historic district review. We recommend getting written approval before we order materials so there are no surprises. We've worked with several HOAs around Columbia and know what documentation they typically ask for.
Are you fully insured for work at my Columbia property?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide certificates of insurance before work begins so you have them for your records.
What maintenance should I do on a metal roof in Columbia between storms?
Check gutters and valleys for pine straw and leaf buildup, especially after spring and fall. Look for loose or backed-out fasteners after high winds, and keep tree limbs trimmed back from the roof. An annual inspection, particularly before hurricane season, can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm